Strawberry farming demands intensive labor for monitoring and maintaining plant health. To address this, Team SARAL develops an autonomous robot for the 2024 ASABE Student Robotics Challenge, capable of navigation, unhealthy leaf detection, and removal. The system addresses labor shortages, reduces costs, and supports sustainable farming through vision-based plant assessment. This work demonstrates the potential of robotics to modernize strawberry cultivation and enable scalable, intelligent agricultural solutions.

To reproduce natural standing-up motion, recent studies have emphasized the importance of coordination between the assisting robot and the human. However, many non-wearable assistive devices have struggled to replicate natural motion trajectories. While wearable devices offer better coordination with the human body, they present challenges in completely isolating mechanical and electrical hazards. To address this, we developed a novel standing-assist robot that integrates features of both wearable and non-wearable systems, aiming to achieve high coordination while maintaining safety. The device employs a four-link mechanism aligned with the human joint structure, designed to reproduce the S-shaped trajectory of the hip and the arc trajectory of the knee during natural standing-up motion. Subject-specific trajectory data were obtained using a gyroscope, and the link lengths were determined to drive the seat along the optimal path. A feedforward speed control using a stepping motor was implemented, and the reproducibility of the trajectory was evaluated based on the geometric constraints of the mechanism. A load-bearing experiment with weights fixed to the seat was conducted to assess the trajectory accuracy under different conditions. Results showed that the reproduction errors for the hip and knee trajectories remained within approximately 4 percent of the seat's total displacement, demonstrating high fidelity to the target paths. In addition, durability testing, thermal safety evaluation, and risk assessment confirmed the reliability and safety of the system for indoor use. These findings suggest that the proposed design offers a promising approach for developing assistive technologies that adapt to individual physical characteristics, with potential applications in elderly care and rehabilitation.

-- Existing multi - finger robotic hands face several limitations, including excessive weight, mechanical complexity, high cost, and constraints in both payload capacity and de - grees of freedom (DoF). These challenges hinder their wide adoption, especially when paired with collaborative robotic arms with limited payload capacity. To address these challenges, we present Krysalis Hand, a five - finger robotic end - effector that combines a lightweight design, high payload capacity, and a high number of degrees of freedom (DoF) to enable dexterous manipulation in both industrial and research settings. Each finger joint features a self - locking mechanism that allows the hand to sustain large external forces without active motor engagement. This approach shifts the payload limitation from the motor strength to the mechanical strength of the hand, allowing the use of smaller, more cost - effective motors. With 18 DoF and weighing only 790 grams, the Krysalis Hand delivers an active squeezing force of 10 N per finger and supports a passive payload capacity exceeding 10 lbs. These characteristics make Krysalis Hand one of the lightest, strongest, and most dexterous robotic end - effectors of its kind. Experimental evaluations validate its ability to perform intricate manipulation tasks and handle heavy payloads, underscoring its potential for industrial applications as well as academic research. HE rise of automation in recent decades has funda - mentally transformed modern manufacturing, delivering greater efficiency, reduced costs, and increased adaptability [1]. However, due to software complexity, hardware con - straints, and limited adaptability, assembly floors have been the least beneficiaries of automation. The technological lag in assembly automation, partly rooted in Moravec's paradox, stems primarily from the technical complexity of even the simplest tasks, such as threading a wire through a hole or connecting an electrical plug [2], let alone assembling intricate parts. On the software front, with recent advances in machine learning, the assimi - lation of large volumes of multi - modal sensory data and the generation of high - dimensional actions is now more feasible than ever before [5], [6].

Warehouse robotic systems equipped with vacuum grippers must reliably grasp a diverse range of objects from densely packed shelves. However, these environments present significant challenges, including occlusions, diverse object orientations, stacked and obstructed items, and surfaces that are difficult to suction. We introduce \tetra, a novel vacuum-based grasping strategy featuring four suction cups mounted on linear actuators. Each actuator is equipped with an optical time-of-flight (ToF) proximity sensor, enabling reactive grasping. We evaluate \tetra in a warehouse-style setting, demonstrating its ability to manipulate objects in stacked and obstructed configurations. Our results show that our RL-based policy improves picking success in stacked-object scenarios by 22.86\% compared to a single-suction gripper. Additionally, we demonstrate that TetraGrip can successfully grasp objects in scenarios where a single-suction gripper fails due to physical limitations, specifically in two cases: (1) picking an object occluded by another object and (2) retrieving an object in a complex scenario. These findings highlight the advantages of multi-actuated, suction-based grasping in unstructured warehouse environments. The project website is available at: \href{https://tetragrip.github.io/}{https://tetragrip.github.io/}.

Rapidly Built Medical Crash Cart! Lessons Learned and Impacts on High-Stakes Team Collaboration in the Emergency Room Abstract --Designing robots to support high-stakes teamwork in emergency settings presents unique challenges, including seamless integration into fast-paced environments, facilitating effective communication among team members, and adapting to rapidly changing situations. While teleoperated robots have been successfully used in high-stakes domains such as firefighting and space exploration, autonomous robots that aid high-stakes teamwork remain underexplored. T o address this gap, we conducted a rapid prototyping process to develop a series of seemingly autonomous robot designed to assist clinical teams in the Emergency Room. We transformed a standard crash cart--which stores medical equipment and emergency supplies into a medical robotic crash cart (MCCR). The MCCR was evaluated through field deployments to assess its impact on team workload and usability, identified taxonomies of failure, and refined the MCCR in collaboration with healthcare professionals. By publicly disseminating our MCCR tutorial, we hope to encourage HRI researchers to explore the design of robots for high-stakes teamwork. Teleoperated robots have become indispensable tools for action teams--highly skilled specialist teams that collaborate in short, high-pressure events, requiring improvisation in unpredictable situations [1]. For example, disaster response teams rely on teleoperated robots and drones to aid search and rescue operations [2], [3]. High-stakes military and SW A T teams use teleoperated ordnance disposal [4] and surveillance robots [5] to keep the teams safe. Surgical teams employ teleoperated robots to perform keyhole surgeries with a level of precision that would be unimaginable without these machines [6], [7]. We built three teleoperated medical crash cart robots (MCCRs). MCCR 1 delivers supplies using a hoverboard circuit. MCCR 2 delivers supplies, recommends supplies using drawer opening capabilities, and was deployed at a medical training event which revealed insights.

This paper presents the analytic modeling of mobile heavy-duty manipulators with actively articulated suspension and its optimal control to maximize its static and dynamic stabilization. By adopting the screw theory formalism, we consider the suspension mechanism as a rigid multibody composed of two closed kinematic chains. This mechanical modeling allows us to compute the spatial inertial parameters of the whole platform as a function of the suspension's linear actuators through the articulated-body inertia method. Our solution enhances the computation accuracy of the wheels' reaction normal forces by providing an exact solution for the center of mass and inertia tensor of the mobile manipulator. Moreover, these inertial parameters and the normal forces are used to define metrics of both static and dynamic stability of the mobile manipulator and formulate a nonlinear programming problem that optimizes such metrics to generate an optimal stability motion that prevents the platform's overturning, such optimal position of the actuator is tracked with a state-feedback hydraulic valve control. We demonstrate our method's efficiency in terms of C++ computational speed, accuracy and performance improvement by simulating a 7 degrees-of-freedom heavy-duty parallel-serial mobile manipulator with four wheels and actively articulated suspension.

This paper addresses the challenges of vision-based manipulation for autonomous cutting and unpacking of transparent plastic bags in industrial setups, aligning with the Industry 4.0 paradigm. Industry 4.0, driven by data, connectivity, analytics, and robotics, promises enhanced accessibility and sustainability throughout the value chain. The integration of autonomous systems, including collaborative robots (cobots), into industrial processes is pivotal for efficiency and safety. The proposed solution employs advanced Machine Learning algorithms, particularly Convolutional Neural Networks (CNNs), to identify transparent plastic bags under varying lighting and background conditions. Tracking algorithms and depth sensing technologies are utilized for 3D spatial awareness during pick and placement. The system addresses challenges in grasping and manipulation, considering optimal points, compliance control with vacuum gripping technology, and real-time automation for safe interaction in dynamic environments. The system's successful testing and validation in the lab with the FRANKA robot arm, showcases its potential for widespread industrial applications, while demonstrating effectiveness in automating the unpacking and cutting of transparent plastic bags for an 8-stack bulk-loader based on specific requirements and rigorous testing.

Interactive sensors are an important component of robotic systems but often require manual replacement due to wear and tear. Automating this process can enhance system autonomy and facilitate long-term deployment. We developed an autonomous sensor exchange and calibration system for an agriculture crop monitoring robot that inserts a nitrate sensor into cornstalks. A novel gripper and replacement mechanism, featuring a reliable funneling design, were developed to enable efficient and reliable sensor exchanges. To maintain consistent nitrate sensor measurement, an on-board sensor calibration station was integrated to provide in-field sensor cleaning and calibration. The system was deployed at the Ames Curtis Farm in June 2024, where it successfully inserted nitrate sensors with high accuracy into 30 cornstalks with a 77$\%$ success rate.

In the quest for electrically-driven soft actuators, the focus has shifted away from liquid-gas phase transition, commonly associated with reduced strain rates and actuation delays, in favour of electrostatic and other electrothermal actuation methods. This prevented the technology from capitalizing on its unique characteristics, particularly: low voltage operation, controllability, scalability, and ease of integration into robots. Here, we introduce a phase transition electric soft actuator capable of strain rates of over 16%/s and pressurization rates of 100 kPa/s, approximately one order of magnitude higher than previous attempts. Blocked forces exceeding 50 N were achieved while operating at voltages up to 24 V. We propose a method for selecting working fluids which allows for application-specific optimization, together with a nonlinear control approach that reduces both parasitic vibrations and control lag. We demonstrate the integration of this technology in soft robotic systems, including the first quadruped robot powered by liquid-gas phase transition.

The decline of bee and wind-based pollination systems in greenhouses due to controlled environments and limited access has boost the importance of finding alternative pollination methods. Robotic based pollination systems have emerged as a promising solution, ensuring adequate crop yield even in challenging pollination scenarios. This paper presents a comprehensive review of the current robotic-based pollinators employed in greenhouses. The review categorizes pollinator technologies into major categories such as air-jet, water-jet, linear actuator, ultrasonic wave, and air-liquid spray, each suitable for specific crop pollination requirements. However, these technologies are often tailored to particular crops, limiting their versatility. The advancement of science and technology has led to the integration of automated pollination technology, encompassing information technology, automatic perception, detection, control, and operation. This integration not only reduces labor costs but also fosters the ongoing progress of modern agriculture by refining technology, enhancing automation, and promoting intelligence in agricultural practices. Finally, the challenges encountered in design of pollinator are addressed, and a forward-looking perspective is taken towards future developments, aiming to contribute to the sustainable advancement of this technology.